All Packages  Class Hierarchy  This Package  Previous  Next  Index

Class java.text.NumberFormat

java.lang.Object
   |
   +----java.text.Format
           |
           +----java.text.NumberFormat

public abstract class NumberFormat

extends Format

implements Cloneable

NumberFormat helps you to format and parse numbers for any locale. Your code can be completely independent of the locale conventions for decimal points, thousands-separators, or even the particular decimal digits used, or whether the number format is even decimal.

To format a number for the current Locale, use one of the factory class methods:

  myString = NumberFormat.getInstance().format(myNumber);
 

 NumberFormat nf = NumberFormat.getInstance();
 for (int i = 0; i < a.length; ++i) {
     output.println(nf.format(myNumber[i]) + "; ");
 }
 

 NumberFormat nf = NumberFormat.getInstance(Locale.FRENCH);
 

 myNumber = nf.parse(myString);
 

You can also control the display of numbers with such methods as setMinimumFractionDigits. If you want even more control over the format or parsing, or want to give your users more control, you can try casting the NumberFormat you get from the factory methods to a DecimalNumberFormat. This will work for the vast majority of locales; just remember to put it in a try block in case you encounter an unusual one.

You can also use forms of the parse and format methods with ParsePosition and FieldPosition to allow you to:

• progressively parse through pieces of a string
• align the decimal point and other areas

1. If you are using a monospaced font with spacing for alignment, you can pass the FieldPosition in your format call, with field = INTEGER_FIELD. On output, getEndIndex will be set to the offset between the last character of the integer and the decimal. Add (desiredSpaceCount - getEndIndex) spaces at the front of the string.
2. If you are using proportional fonts, instead of padding with spaces, measure the width of the string in pixels from the start to getEndIndex. Then move the pen by (desiredPixelWidth - widthToAlignmentPoint) before drawing the text. It also works where there is no decimal, but possibly additional characters at the end, e.g. with parentheses in negative numbers: "(12)" for -12.

See Also:

DecimalFormat, ChoiceFormat

FRACTION_FIELD

Field constant used to construct a FieldPosition object.

INTEGER_FIELD

Field constant used to construct a FieldPosition object.

NumberFormat()

clone()

Overrides Cloneable

equals(Object)

Overrides equals

format(double)

Specialization of format.

format(double, StringBuffer, FieldPosition)

Specialization of format.

format(long)

Specialization of format.

format(long, StringBuffer, FieldPosition)

Specialization of format.

format(Object, StringBuffer, FieldPosition)

Formats an object to produce a string.

getAvailableLocales()

Get the set of Locales for which NumberFormats are installed

getCurrencyInstance()

Returns a currency format for the current default locale.

getCurrencyInstance(Locale)

Returns a currency format for the specified locale.

getInstance()

Returns the default number format for the current default locale.

getInstance(Locale)

Returns the default number format for the specified locale.

getMaximumFractionDigits()

Returns the maximum number of digits allowed in the fraction portion of a number.

getMaximumIntegerDigits()

Returns the maximum number of digits allowed in the integer portion of a number.

getMinimumFractionDigits()

Returns the minimum number of digits allowed in the fraction portion of a number.

getMinimumIntegerDigits()

Returns the minimum number of digits allowed in the integer portion of a number.

getNumberInstance()

Returns a general-purpose number format for the current default locale.

getNumberInstance(Locale)

Returns a general-purpose number format for the specified locale.

getPercentInstance()

Returns a percentage format for the current default locale.

getPercentInstance(Locale)

Returns a percentage format for the specified locale.

hashCode()

Overrides hashCode

isGroupingUsed()

Returns true if grouping is used in this format.

isParseIntegerOnly()

Returns true if this format will parse numbers as integers only.

parse(String)

Convenience method.

parse(String, ParsePosition)

Returns a Long if possible (e.g.

parseObject(String, ParsePosition)

Parses a string to produce an object.

setGroupingUsed(boolean)

Set whether or not grouping will be used in this format.

setMaximumFractionDigits(int)

Sets the maximum number of digits allowed in the fraction portion of a number.

setMaximumIntegerDigits(int)

Sets the maximum number of digits allowed in the integer portion of a number.

setMinimumFractionDigits(int)

Sets the minimum number of digits allowed in the fraction portion of a number.

setMinimumIntegerDigits(int)

Sets the minimum number of digits allowed in the integer portion of a number.

setParseIntegerOnly(boolean)

Sets whether or not numbers should be parsed as integers only.

 public static final int INTEGER_FIELD

Field constant used to construct a FieldPosition object. Signifies that the position of the integer part of a formatted number should be returned.

See Also:

FieldPosition

 public static final int FRACTION_FIELD

Field constant used to construct a FieldPosition object. Signifies that the position of the fraction part of a formatted number should be returned.

See Also:

FieldPosition

 public NumberFormat()

 public final StringBuffer format(Object number,
                                  StringBuffer toAppendTo,
                                  FieldPosition pos)

Formats an object to produce a string.

Overrides:

format in class Format

 public final Object parseObject(String source,
                                 ParsePosition parsePosition)

Parses a string to produce an object.

Overrides:

parseObject in class Format

 public final String format(double number)

Specialization of format.

See Also:

format

 public final String format(long number)

Specialization of format.

See Also:

format

 public abstract StringBuffer format(double number,
                                     StringBuffer toAppendTo,
                                     FieldPosition pos)

Specialization of format.

See Also:

format

 public abstract StringBuffer format(long number,
                                     StringBuffer toAppendTo,
                                     FieldPosition pos)

Specialization of format.

See Also:

format

 public abstract Number parse(String text,
                              ParsePosition parsePosition)

Returns a Long if possible (e.g. within range [Long.MIN_VALUE, Long.MAX_VALUE], and with no decimals), otherwise a Double. If IntegerOnly is set, will stop at a decimal point (or equivalent; e.g. for rational numbers "1 2/3", will stop after the 1). Does not throw an exception; if no object can be parsed, index is unchanged!

See Also:

isParseIntegerOnly, parseObject

 public Number parse(String text) throws ParseException

Convenience method.

Throws: ParseException

if the specified string is invalid.

See Also:

format

 public boolean isParseIntegerOnly()

Returns true if this format will parse numbers as integers only. For example in the English locale, with ParseIntegerOnly true, the string "1234." would be parsed as the integer value 1234 and parsing would stop at the "." character. Of course, the exact format accepted by the parse operation is locale dependant and determined by sub-classes of NumberFormat.

 public void setParseIntegerOnly(boolean value)

Sets whether or not numbers should be parsed as integers only.

See Also:

isParseIntegerOnly

 public static final NumberFormat getInstance()

Returns the default number format for the current default locale. The default format is one of the styles provided by the other factory methods: getNumberInstance, getCurrencyInstance or getPercentInstance. Exactly which one is locale dependant.

 public static NumberFormat getInstance(Locale inLocale)

Returns the default number format for the specified locale. The default format is one of the styles provided by the other factory methods: getNumberInstance, getCurrencyInstance or getPercentInstance. Exactly which one is locale dependant.

 public static final NumberFormat getNumberInstance()

Returns a general-purpose number format for the current default locale.

 public static NumberFormat getNumberInstance(Locale inLocale)

Returns a general-purpose number format for the specified locale.

 public static final NumberFormat getCurrencyInstance()

Returns a currency format for the current default locale.

 public static NumberFormat getCurrencyInstance(Locale inLocale)

Returns a currency format for the specified locale.

 public static final NumberFormat getPercentInstance()

Returns a percentage format for the current default locale.

 public static NumberFormat getPercentInstance(Locale inLocale)

Returns a percentage format for the specified locale.

 public static Locale[] getAvailableLocales()

Get the set of Locales for which NumberFormats are installed

Returns:

available locales

 public int hashCode()

Overrides hashCode

Overrides:

hashCode in class Object

 public boolean equals(Object obj)

Overrides equals

Overrides:

equals in class Object

 public Object clone()

Overrides Cloneable

Overrides:

clone in class Format

 public boolean isGroupingUsed()

Returns true if grouping is used in this format. For example, in the English locale, with grouping on, the number 1234567 might be formatted as "1,234,567". The grouping separator as well as the size of each group is locale dependant and is determined by sub-classes of NumberFormat.

See Also:

setGroupingUsed

 public void setGroupingUsed(boolean newValue)

Set whether or not grouping will be used in this format.

See Also:

isGroupingUsed

 public int getMaximumIntegerDigits()

Returns the maximum number of digits allowed in the integer portion of a number.

See Also:

setMaximumIntegerDigits

 public void setMaximumIntegerDigits(int newValue)

Sets the maximum number of digits allowed in the integer portion of a number. maximumIntegerDigits must be >= minimumIntegerDigits. If the new value for maximumIntegerDigits is less than the current value of minimumIntegerDigits, then minimumIntegerDigits will also be set to the new value.

See Also:

getMaximumIntegerDigits

 public int getMinimumIntegerDigits()

Returns the minimum number of digits allowed in the integer portion of a number.

See Also:

setMinimumIntegerDigits

 public void setMinimumIntegerDigits(int newValue)

Sets the minimum number of digits allowed in the integer portion of a number. minimumIntegerDigits must be <= maximumIntegerDigits. If the new value for minimumIntegerDigits exceeds the current value of maximumIntegerDigits, then maximumIntegerDigits will also be set to the new value

See Also:

getMinimumIntegerDigits

 public int getMaximumFractionDigits()

Returns the maximum number of digits allowed in the fraction portion of a number.

See Also:

setMaximumFractionDigits

 public void setMaximumFractionDigits(int newValue)

Sets the maximum number of digits allowed in the fraction portion of a number. maximumFractionDigits must be >= minimumFractionDigits. If the new value for maximumFractionDigits is less than the current value of minimumFractionDigits, then minimumFractionDigits will also be set to the new value.

See Also:

getMaximumFractionDigits

 public int getMinimumFractionDigits()

Returns the minimum number of digits allowed in the fraction portion of a number.

See Also:

setMinimumFractionDigits

 public void setMinimumFractionDigits(int newValue)

Sets the minimum number of digits allowed in the fraction portion of a number. minimumFractionDigits must be <= maximumFractionDigits. If the new value for minimumFractionDigits exceeds the current value of maximumFractionDigits, then maximumIntegerDigits will also be set to the new value

See Also:

getMinimumFractionDigits

All Packages  Class Hierarchy  This Package  Previous  Next  Index